Motorcycle Maintenance 101

Motorcycle Maintenance 101

December 27, 2021 Off By Virgil Olson

Repairing and maintaining your motorcycle is a lot of fun. There’s nothing better than how your bike feels when you start it up and run it smoothly after doing some repair work or some sort of regular maintenance. When it comes to motorcycles, doing some maintenance yourself can save you money, protect your drivers and give you more choice. In practice, the requirements for each of these tasks may vary from bike to bike. Consult the user manual before navigating to issues such as the location of filters and plugs, and parts that must be removed to access them. For bikes without B-pillars, use the C-pillars to place them in a vertical position.

The world of power sports is very deep and full of stories about motorcycles and brands. There is a lot of motorcycle company which has started from zero and now reached to a bigger level. Today’s industry appears to be an inch wide but a mile deep.

How to maintain a motorcycle in good condition and good health

Who doesn’t want a motorcycle to be new and healthy? It is a common tendency not to repair or maintain motorcycles for months or years after they are purchased. To keep a motorcycle in good condition, one must perform a few simple tasks for a glitch-free motorcycle.

Check the tires and wheels

The importance of tire health cannot be overemphasized. Age is a factor to consider, but it is by no means the only and by no means the most important factor in determining the serviceability of a tire. Check your tires for possible cuts and scratches that could cause unwanted events like ruptured tires. Don’t forget to check your tire treads at least once a week. Also, check the wheel balance and alignment.

Check engine oil

Engine oil plays an important role in the smooth operation and maintenance of your motorcycle. Check for possible oil leaks. Carbon deposits cause the oil to thicken, creating resistance to the movement of parts inside the engine. It is very important to understand that riding your bike on dirty oil not only increases fuel consumption but also significantly shortens engine life. A car engine contains several liters of oil, but some motorcycles contain only 1.5 liters.

Maintain Brakes

Always keep both brakes at the correct distance from each other. If the braking is too strong or too weak, both are very dangerous. It is always a good idea to tighten the brakes according to the rider’s personal style and requirements. If the squeaking noise persists, replace your bicycle’s front brake pads. It could also be due to a lack of oil. Also, check the brake lines for signs of wear or age. Rubber brake lines don’t last long, so even if your bike is only 5 or 10 years old, you may already be ready to retire. The new stainless steel line greatly improves brake feel and handling. Brake fluid is much more neglected than the line.

Maintain Battery

Batteries must be fully charged when used in the charger service. If not, connect now. Fully charged is a good sign, but there’s no guarantee you won’t fail midway through the season’s first big trip. Motorcycle batteries require periodic maintenance to ensure long-term, trouble-free operation. If necessary, fill the battery with distilled water. Inspect the battery for leaks. The motorcycle must be clean, and the battery must be free of leaks. If the motorcycle will not be used for an extended period, make sure the battery is fully charged.

Change the coolant

Change the coolant to prevent the engine from overheating, freezing, or corrosion. Remove the necessary accessories to access the coolant drain bolts, then place the pan under the engine and remove the bolts. Remove the radiator cap to make sure everything drains.


Motorcycle maintenance is about preventing unsafe cycling. Don’t wait for something to explode while riding. This may result in personal injury or serious damage to the bicycle. Bicycles that are regularly serviced are tightened, inspected, and lubricated to keep parts in good condition so that there is no risk of the parts sticking, breaking, or corroding. There are many maintenance tasks that can be performed at home with the right tools, so you can save money and better understand your motorcycle’s performance.